Storage indirect water heater: operating principle, connection, feedback
Water heaters for indirect water heating inrecently are in great demand. In terms of size, the models are quite cumbersome. The nominal power rating starts from 2 kW. For larger families, this type of device is great. Before buying a device, it's important to consider performance. At the same time, the completing materials play an important role. In order to understand in more detail the indirect type water heaters, it is necessary to understand the principle of their operation.
Principle of operation of the device
The market presents a wide variety ofindirect heaters. The principle of the devices is to heat the spiral element. Initially, the voltage from the 220 V network goes to the power supply. Then the control system is activated. The inlet pressure of the device depends on the valve. In order to protect the system from overvoltage, a fuse is necessary. The temperature of the water is controlled by the controller. Conductivity heating elements are quite different.
The water is supplied through the pipe. In some cases, a flexible hose is used. The heat medium is connected to the insulator. When the power of the model is increased, the heating spiral element inside the tank is heated. Heated water comes through the outlet pipe. In this case, the control unit is used with a stabilizer. The temperature limit is controlled by the thermometer.
How to connect the device?
Connecting the indirect heateris quite simple. First of all, the tank is fixed directly. Most often, horizontal stops are used for this purpose. In this case, much depends on the size of the water heater. After fixing the tank, proceed to connect the pipe to the water supply system. For this purpose, a metal clamp is used. Direct connection in devices is provided screw type. The outlet connection is connected to the mixer. The network cable is connected to a power outlet.
Description of water heaters Gorenje GV 200
Said indirect heating water heaterGorenje has a high rated capacity. In this case, the diffuser is of low sensitivity. The inlet pressure of the device is 3.3 bar. The corrosion protection system is applied first class. The outlet pressure is approximately 7.2 bar. The sealant in the standard kit is available from foam.
The nozzle of this water heater is madecompletely made of plastic. The heating element of the device is well resistant to corrosion. On the inside of the tank, a cobalt layer is applied. If you believe the responses of experts, then problems with the diffuser occur infrequently. Buy the presented indirect heater can be priced from 33 thousand rubles.
Opinion about Drazice OKCV 200 models
These boilers (water heaters) of indirect heatinghave a lot of advantages. First of all, they are noteworthy for their high power. The model operates at a frequency of 55 Hz. Problems with the diffuser occur infrequently. The inlet pressure of this water heater is 3.8 bar. The corrosion protection system is not provided in this case.
If you believe the responses of specialists, the problems withleakage of the tank occurs infrequently. The pressure stabilizer of this indirect type water heater is not provided. The outlet pressure of the system is at the level of 2.2 bar. The connector is used in this case with a gasket. A fuse is worthy of special attention. The maximum permissible overload is at 7.3 A. The polystyrene filter is used with the gasket. The diffuser in the system is applied without a filter. Buy this water heater can be priced from 29 thousand rubles.
Customer Reviews of Drazice OKCV 230
These combined water heaters of indirectheating in recent years are in great demand. The diffuser is designed for 3.3 bar. If you believe the feedback of buyers, then the connecting bushing is capable of withstanding heavy loads. The input resistance of the model is 4.2 bar. The corrosion protection system is used in the first class. Directly the bushing is under the gasket. The spiral TEN in the device is designed for 3 kW. Performance of the system is at the level of 280 liters. Buy a water heater of the presented series can be priced from 23 thousand rubles.
Description of water heaters Drazice OKCV 250
The indirect type of water heaterIt boasts a high rated output. The system operates at a frequency of 34 Hz. The isolator is of a wired type. The filter in the device is made entirely of polymer. The limiting conductivity of the coolant is at a level of 10 microns. If you believe the responses of customers, then problems with the filter arise infrequently.
Protection against corrosion is provided in the third class. The width of the coil does not exceed 23 cm. The minimum conductivity of the coolant is 8 μ. The pressure stabilizer is located in the lower part of the structure. On the inside, the tank is treated with enamel. The diameter of the upper branch pipe is 2.3 cm. The outlet pressure of the system is located at the 2 bar mark. The diameter of the lower branch pipe is 21 cm. The active protection anode of this water heater is available. The inlet pressure of the presented model is at the level of 3.6 bar.
There is a filter from the lime deposits. The diffuser of the present water heater is of the impulse type. The flange of the model is made entirely of stainless steel. The tank is internally treated completely with enamel. A wide seal is installed over the diffuser. The outlet nozzle in the device is used for 2.2 cm. The thermostat is used with the sensor. Buy this water heater user is able to price from 34 thousand rubles.
The Atlantic CWH 80
The water heater of this series has a lot of advantages. First of all, buyers note an interesting design and compactness. The nominal capacity of the water heater of the presented series is 4.5 kW. There is no isolator for system protection. The filter in the model is made entirely of plastic.
The output pressure of the water heater is onlevel of 2.1 bar. The performance of the model of this series is located at the level of 240 liters. On the inside of the tank, a cobalt layer is applied. The inlet pressure of the model is about 4.5 bar. Buy this indirect heater type of the user is able at a price of 27 thousand rubles.
Customer Reviews for Atlantic CWH 90
This indirectly heated water heater inlately has been in great demand. Reviews, he usually gets for a reliable protection system. The energy consumption ratio is at 89%. The optimum temperature of the device is 70 degrees. The gasket at the water heater is protected by a connecting sleeve. The maximum capacity of the system is 340 liters. The fuse in the model is applied unidirectional type.
In the lower part of the structure there is a terminalbranch pipe. The thermostat in this case is used with a sensor. The diffuser of the model has an impulse type. The inlet pressure of the configuration is 3.3 bar. The heating time to 50 degrees does not exceed 35 minutes. The diameter of the outlet branch pipe is as much as 2.3 cm. On the market this indirect heater costs not more than 33 thousand rubles.
Description of water heaters Tesy GCV 9S
These indirectly heated water heatersreviews are mostly positive. Many buyers note an excellent heating element. From corrosion it is protected by 100%. Problems with the input filter are very rare. A wire connector is mounted above the heating element. The maximum inlet pressure is 3.7 bar.
On the inside, the tank is treated with cobalt. The nominal power of the device is located at 4 kW. The limiting conductivity of the coolant does not exceed 10 microns. The spiral TEN is installed in a small diameter. A polystyrene filter is not provided for this water heater. On the market, the model costs about 29 thousand rubles.
The Tesy GCV 3S
Presented indirect heateris produced with two output valves. Above the spiral TEN is a polystyrene filter. The maximum conductivity of the coolant is 12 microns. The diameter of the upper branch pipe is 1.4 cm. The rated power of this heater is 5 kW. Above the polystyrene filter, the water heater has a wire insulator.
Spiral TEN is made entirely ofof stainless steel. If you believe the feedback of buyers, the temperature is regulated without problems. A wire connector is installed under the tank. According to many buyers, the diffuser in the device is protected well. Problems with the flange are very rare. The maximum capacity of this indirect heater is 348 liters. Cobalt layer on the inside of the tank is applied.
The threshold input pressure is at 3.5 bar. The minimum conductivity of the coolant is 8 microns. The diffuser of this water heater is of the impulse type. In total, the model has three input filters. The price for this indirectly heated water heater fluctuates around 30 thousand rubles.
Customer Reviews of Tesy GCV 5S
This storage water heater of indirectheating reviews gets different. Owners of it are praised for high rated power. Design by the manufacturer is worked out perfectly. The wire insulator is of high quality. A small polystyrene filter is used above the spiral TEN. Protection against corrosion is applied in the third class. If you believe the customers, then problems with the wear of the heater occur infrequently.
Limit conductivity of the element is onthe mark of 22 microns. The permissible temperature of the magnesium anode is 30 degrees. The outlet pressure of the water heater does not exceed 2.6 bar. The wired connector is missing from the model. If you believe the buyers, then the fuse is of high quality. To buy the presented storage water heater of indirect heating it is possible at the price from 28 thousand rbl.
Description of water heaters Kospel Termo Max SW 200
Presented water heater reviews frombuyers often gets for their compactness. In this case, the nominal power equals exactly 3 kW. The isolator in the device is of the wired type. The system from corrosion is used in the second class. The limiting conductivity of the coolant is at the level of 13 kW. The diameter of the upper branch pipe is exactly 2.1 cm. Above the filter there is a special diffuser.
The outlet pipe of the water heater is available withprotective ring. The minimum conductivity of the coolant is 7 microns. The cobalt layer is provided by the manufacturer. The energy consumption factor is no more than 70%. Buy the specified water heater user is able to price from 27 thousand rubles.