Plastic border for the bathroom: types and methods of installation
After the repair, a small gap forms between the bathroom and the wall. Through it, water can fall on the floor. This raises a lot of trouble. If this is an apartment, a dark spot may appear on the ceiling below the neighbors. But even if the owners live in a private house or on the first floor, the moisture accumulated on the floor will provoke the appearance of fungus, unpleasant smell and dampness. This negatively affects the state of health.
To avoid such problems, home or apartment owners acquireplastic border for the bathroom.There are several options presented accessories. How to choose a suitable type, as well as correctly mount it, should be considered before starting repair.
Plastic curb orbathroom plinthis a decorative product that prevents moisture from entering the floor.There are several varieties of these accessories. The choice depends on the installation of the bath and some features of operation of the room.
If an insignificant gap is formed when installing plumbing, it can be covered with a plastic curb. It is attached to the base with a special glue. It may be present on the back of the plinth. However, the sale also presented borders without adhesive layer. In this case, the gap must first be treated with a sealant. Only then can you install a curb. It will cover unseemly traces of silicone or sealant.
If the distance from the bath to the wall is too large (more than 3 cm), it is better to give preference to other types of borders. The plastic will in this case quickly peel off. Ceramic baseboards in this case will be more efficient.
On sale there are several types of borders. They can be divided into two groups. Hard plinths are assigned to the first category. They are available for sale in a large assortment. Their reverse side has no adhesive layer. When using them you will need to use silicone.
The second category includesa border for a bathroom self-adhesive.It is made in the form of a flexible tape. On the back of it there is an adhesive layer. Therefore, this product is very easy to install.
In order not to be mistaken in the choice, one should estimate the distance between the bathroom and the wall. If it is only a few millimeters, you can use a self-adhesive curb. It should also pay attention to the walls. They should be smooth.
If the gap between the bathroom and the wall is from 1 to 3 cm, it will be preferable to mount a solid baseboard. In this case, the protection will be durable and effective. Such curbs are preferable if the bath is fixed rigidly. If it is installed unstable, it is better to purchase soft adhesive tapes.
Plastic hard border
Hard border can be made of acrylic or PVC. This is the cheapest kind of similar accessories. PVC plinth oracrylic border for the bathroompresented in a variety of configurations. The size of its shelves can be both large and small. The choice depends on the size of the gap. The plinth should be 3 times the width of the slot.
On sale are hard plastic borders of various colors, textures. This allows you to choose the product that best matches the interior of the bathroom.Due to the reasonable price, the presented products are widely used in our country.
Duration of operation of this category of accessories is quite modest. Over time, they may pass a little water in certain areas.
Sealing bathcan be made with elastic tape on a sticky basis. They are made of polyethylene. On sale they are presented in a twisted form. This is one of the reliable options for sealing the gap between the bathroom and the wall.
It is possible to get a tape border in various width. The choice depends on the size of the gap. Most often you can find it white borders. On the reverse side of such products applied adhesive base. It may not be reliable enough. Therefore, it is sometimes necessary to increase the strength of the baseboard to the base with a sealant.
Such plinths are very easy to install. Therefore, they have won recognition among consumers. This is a fairly reliable system. However, to ensure maximum protection against water leakage under such a curb, it is better to strengthen it with a sealant.
PVC border for the bathroom can be mounted in two ways. The first involves an approach under the ceramic tiles, which is decorated with a wall. The installation of the curb is also performed during the repair. The upper edge of the plinth is put under the finishing material.In this case, be sure to know how high the bath will be and how it will be installed. If it is wrong to calculate the height, you have to redo everything. Also with this method of installation the bathroom can not be changed without carrying out a complete repair in the room.
The second installation option involves the installation of such products after the completion of finishing works. When the bath is attached to the wall, it will be possible to estimate the size of the gap between it and the tile. Further, based on the measurements obtained, a corner of the required size is acquired.
The sides of such baseboards can be elastic. This is necessary to ensure a snug fit of the curb to the base. If the reverse side of the plinth is rigid, it can be pressed tightly against the wall only if the finish is without relief. You can use silicone to close all irregularities.
Studying the question of how to glue the curb in the bathroom, it is necessary to consider the existing sealants today. On sale are a huge number of similar products. First of all, preference should be given to a proven manufacturer. It is also important to evaluate the properties of the sealant.
The adhesive base for the plinth can be based on acrylic or silicone. Conventional formulations designed for use in a dry environment will not work. They will lose their appearance in a few months. On such surfaces, fungus and bacteria are rapidly developing. After a short time, you will have to re-glue the baseboard, cleaning the remnants of the old glue from the wall and bath.
To avoid this, you must purchase a silicone sealant with special additives. For such purposes, you should purchase sanitary or aquarium glue. It costs more, but it will take much longer to operate.
Why does the curb come off?
Installingaround the bathroom curbSome masters do not take into account some of the nuances of this work. As a result, over time, the baseboard can peel off from the base. To avoid such trouble, you should know the causes of this phenomenon before installation.
Baths of various materials have varying degrees of hardness.When a person puts his foot in it, there is a slight displacement of the whole structure. It can not even notice. Such vibrations affect the adhesive layer that holds the baseboard in place. If the curb is rigidly attached to the base, after a while it will come off. Acrylic baths are characterized by the greatest amplitude of movement, and iron and steel are the smallest.
To avoid such troubles, you need to glue the corner only on top. Where it is adjacent to the bath, it is not necessary to apply a layer of sealant. This edge just needs to be pressed tightly to the base.
to installbathroom corner curb, you must purchase in the store two plastic plinths. The dimensions of their shelves should be 3 times the gap formed. You will also need to buy one corner and two plugs. In color, they must completely coincide with the border.
Next, with the help of roulette you need to measure the distance, which should cover the baseboards. The resulting value is set aside on the borders. Extra pieces need to be cut with a hacksaw. If you use a cask, work will be easier.
Further, in those places where the plinths will form an angle, one should make cuts at a 45º angle. After that, both parts are combined, checking the correctness of the joint. To avoid inaccuracies, you should check the laying of the curb in the box.
Before gluing the plastic curtain for the bathroom, the surface of the base must be degreased. To do this, you can use the funds presented in the sale. They may have antiseptic properties. This will have a positive effect on the durability of the curb.
If you plan to mount a flexible plinth, a protective layer is removed from its back side. The tape is pressed to the base. If necessary, before installing a special sealant on the curb.
Hard baseboard needs glue on the back side. If the bath is acrylic, sanitary sealant is applied only on the top shelf, which will be adjacent to the tile. For cast iron or steel baths, you can apply sealant to both rear surfaces. Next, the plinth tightly pressed to the base and do not release it for several minutes. The duration of the procedure depends on the properties and manufacturer of the silicone.
Stickingbathroom plinth, it is necessary to adopt some of the advice of professional builders. They will help do the job well.
After the curb has been glued to the base, a sealant may protrude from under it. While the glue is not frozen, you need to wipe it off. In this case, a soft cloth will help.
If the plinth is installed on an acrylic bath, you need to take water in before you work on it. Filling should be a little more than half. In this case, the curb will last longer on the movable structure.
Remove the old curb
Happens oldplastic bathroom curtainneed to be replaced with a new product. You will need to perform a series of actions before installation. First, the old plinth is removed from the bath. The remains of glue from walls and a side clean mechanically. To do this, use a knife or spatula.
After that, the surface of the tile is wiped with detergent. This will remove mold and mildew. Then all surfaces are wiped with an antibacterial agent. This will prevent the emergence of pathogens and fungus behind the side. Surfaces should then dry out.You may need to apply an antibacterial agent in several layers. Before using such solutions it is necessary to study the manufacturer's instructions.
After drying of all layers, the surface is degreased with alcohol and dried again with a hairdryer. After that, according to the above scheme it will be possible to mount the plinth.
Having considered what constitutesplastic bathroom curbas well as its types and methods of installation, everyone will be able to mount such a plinth independently.