How to stretch the strings on the guitar?
Guitar is one of the most common musical instruments. Many novice guitarists try to immediately learn to play on it, disassemble notes, works, chords, rush into the study of musical notation, solfeggio. However, it is important to know the most basic things. For example, the history of the guitar, its device, as the guitar is made. Many have no idea how to tune a guitar or how to pull strings. But these are the first steps in mastering a wonderful musical instrument.
Selection of strings for guitar
First you need to pick up the strings that would fit your instrument. If you bought a guitar without strings, then the question: “How to choose and how to stretch the strings?” Is quite appropriate and natural. In this case, initially you need to pay close attention to how the neck is attached. In the presence of a bolt, we can say that it is quite possible to tension metal strings. But on a glued neck it is strictly forbidden to do this. If you decide to become a classical guitar player and have bought yourself a classical guitar, then you can choose nylon or carbon strings.Nylon is still more practical and more commonly used. In addition, it is best to choose strings from the same set. They are characterized not only by the material of manufacture, but also by the thickness of the winding. Therefore, kits from different manufacturers may sound different. And if you combine them, such a diversity can adversely affect the sound of the instrument, and also significantly complicate its tuning. All these rules are valid not only for acoustic, but also for electric guitar.
How to shoot the strings?
This point comes before the question of how to stretch the strings. There are several basic rules that will help to do this. If the neck is attached without a bolt, then the question often arises: “How to tension the nylon strings in order not to damage the mechanism of the guitar?” There is an answer to it. First you need to carefully remove the old strings. To do this, you should evenly loosen their tension. Manipulations with a guitar should not affect the neck of the instrument. After the tension is greatly relaxed, you can spin the pegs in turn and remove the strings neatly. If you only need to replace one torn, then all manipulations are carried out only with her, without touching the rest.
How to stretch the strings?
Each string set is numbered. After unpacking the necessary, gently pass the string into the hole on the stand. Today, virtually all kits already have a special mount at one end of the string. If it is not, then you can tie a small knot and yourself. After passing the string, you should carefully stretch it to the roller, which is located on the spike. Leaving about three centimeters above the roller hole, you need to start slowly twisting the pegs. This is the whole answer to the question of how to stretch the strings. As you can see, it is very simple. Strings for electric guitars are tightened in exactly the same way. You should pay attention to the fact that the pegs need to be twisted in the same direction - this will facilitate the tuning of the guitar.